A series of polyurea and polyurea hybrid coatings formulated to satisfy a variety of coating demands. DYNA-PUR™ products have excellent adhesion to a variety of substrates, long-term sealing protection, very low vapor transmission rate, and contain zero VOC's.
|
Product Name |
Description |
| DYNA-PUR™ 7411BL
|
Ultra-High solids pure polyurea coating, 1:1 mix ratio, low viscosity formulation. Used as basecoat in two-coat system.
|
| DYNA-PUR™ 7416BL
|
Ultra-High solids pure polyurea coating, 1:1 mix ratio, low viscosity forumulation with increased adhesion to inorganic and non-porous surfaces. Used as basecoat in two-coat system.
|
| DYNA-PUR™ 7421BL
|
Ultra-High solids pure polyurea coating, 2:3 mix ratio, low viscosity formulation. Used as topcoat in two-coat system.
|
| DYNA-PUR™ 7426BL
|
Ultra-High solids pure polyurea coating, 2:3 mix ratio, low viscosity forumlation with increased adhesion to inorganic and non-porous surfaces. Used as topcoat in two-coat system.
|
| DYNA-PUR™ 7821BL
|
Ultra-High solids pure polyurea coating, 1:1 mix ratio. Low viscosity formulation. Used as topcoat in two-coat system.
|
| DYNA-PUR™ 7826BL
|
Ultra-High solids pure polyurea coating, 1:1 mix ratio. Low viscosity formulation, with increased adhesion to inorganic and non-porous surfaces. Used as topcoat in two-coat system.
|
| DYNA-PUR™ 9041BL
|
100% solids pure polyurea coating, 2:3 mix ratio. Designed for balanced performance and use properties.
|
| DYNA-PUR™ 9046BL
|
100% solids pure polyurea coating, 2:3 mix ratio. Designed for balanced performance and use properties, with increased adhesion to inorganic and non-porous surfaces
|
| DYNA-PUR™ 9080BL
|
100% solids pure polyurea coating, 1:1 mix ratio. Designed for thicker (>10 mil single coat) films.
|
| DYNA-PUR™ 9086BL
|
100% solids pure polyurea coating, 1:1 mix ratio. Designed for thicker (>10 mil single coat) films, with increased adhesion to inorganic and non-porous surfaces |
| DYNA-COOL™ 7674BL
|
100% solids pure polyurea, low viscosity liquid applied cool roof coating. 1:1 mix ratio. Can be applied to a new asphalt shingle roof or restore an existing ashpalt shingle roof. This is the primer in a two-coat system. Go to coolroofcoating.net for more information |
| DYNA-COOL™ 9674BL
|
Ultra-high solids pure polyurea, low viscosity liquid applied cool roof coating. 1:1 mix ratio. Can be applied to a new asphalt shingle roof or restore an existing asphalt shingle roof. This is the topcoat in a two-coat system. Go to coolroofcoating.net for more information |
| CRYSTALEDGE™ 8087BL
|
100% solids pure polyurea paint protection coating, 1:1 mix ratio. Contains anti-sag chemistry for vertical applications. Comes in white and black. Go to paintprotectioncoating.com for more information |
| CRYSTALEDGE™ 8097BL
|
100% solids pure polyurea paint protection coating, 1:1 mix ratio. Contains anti-sag chemistry for vertical application. Comes in clear. Go to paintprotectioncoating.com for more information |
A series of polyurethane and epoxy primers that penetrate and seal to provide the chemical base needed to achieve superior inter-coat adhesion with polureas, polyurethanes, and epoxies. DYNA-PUR™ products have excellent adhesion to a variety of substrates, long-term sealing protection, very low vapor transmission rate, and contain zero VOC's.
|
Product Name |
Description |
| DYNA-PRIME™ W-11
|
Single component, waterborne adhesion promoter. For use with inorganic substrates, particularly ceramic and tile. The primer penetrates, seals, and prepares the substrate providing excellent intercoat adhesion.
|
| DYNA-PRIME™ N-15 Water Chasing® primer
|
100% solids, two component polyurea primer that has been designed for high hydrostatic pressure conditions. UV Stable, 3:2 mix ratio.
|
| DYNA-PRIME™ N-23
Water Chasing® primer |
100% solids, two component polyurethane primer that has been formulated as a high performance damp concrete primer. Penetrates and seals with little bubbling to allow ease of topcoat application. Low sensitivity to substrate moisture. Creates water polymer penetrating network within porous substrates. 1:1 mix ratio.
|
| DYNA-PRIME™ N-33
Water Chasing® primer |
100% solids, single component polyurethane primer that has been formulated as a high performance water and/or saturated concrete primer. Penetrates and seals with little bubbling to allow ease of topcoat application. Low sensitivity to substrate moisture. Creates water polymer penetrating network within porous substrates.
|
A series of polyurea and polyurea hybrid coatings designed to spray through two-component low pressure cold spray application equipment. DYNA-PUR™ products have excellent adhesion to a variety of substrates, long-term sealing protection, very low vapor transmission rate, and contain zero VOC's.
|
Product Name |
Description |
| DYNA-PUR™ 130CSL
|
100% solids hybrid polyurea, 100% aliphatic, 1:1 mix ratio.
|
| DYNA-PUR™ 136CSL
|
100% solids hybrid polyurea, 100% aliphatic, 1:1 mix ratio, with increased adhesion to inorganic and non-porous surfaces.
|
| DYNA-PUR™ 300CSL
|
100% solids hybrid polyurea, 100% aliphatic, 1:1 mix ratio. High hardness cold spray formulation.
|
| DYNA-PUR™ 306CSL
|
100% solids hybrid polyurea, 100% aliphatic, 1:1 mix ratio. High hardness cold spray formulation with increased adhesion to inorganic and non-porous surfaces.
|
| DYNA-PUR™ 1137CSR
|
100% solids aromatic polyurea coating, 1:1 mix ratio.
|
| DYNA-PUR™ 8817CSL
|
100% solids pure polyurea, 1:1 mix ratio, fast setting. Contains anti-sag chemistry for vertical applications. High hardness. For applications in areas that may require less than 10 mil of coating thickness.
|
| DYNA-PUR™ 8886CSL
|
100% solids pure polyurea, 1:1 mix ratio, with increased adhesion to inorganic and non-porous surfaces. For applications in areas that may require less than 10 mil of coating thickness.
|
| DYNA-PUR™ 8887CSL
|
100% solids pure polyurea, 1:1 mix ratio. Contains anti-sag chemistry for vertical applications. Excellent flexibility and adhesion. For applications in areas that may require less than 10 mil of coating thickness.
|
A series of polyurea and polyurea hybrid coatings designed for heated, high pressure plural component equipment. DYNA-PUR™ products have excellent adhesion to a variety of substrates, long-term sealing protection, very low vapor transmission rate, and contain zero VOC's.
|
Product Name |
Description |
| DYNA-PUR™ 1107HSR
|
100% solids pure polyurea, 1:1 mix ratio. Designed for heated, high pressure plural component equipment. Formulated as a protective coating or lining for steel and concrete in harsh environments and heavy duty applications.
|
| DYNA-PUR™ 1120HSR
|
100% solids pure polyurea, 1:1 mix ratio. Designed for heated, high pressure plural component equipment. Formulated as a protective coating or lining for steel and concrete in harsh environments and heavy duty applications. Ideal for water immersion applications such as ponds, pools, etc.
|
| DYNA-PUR™ 185HSL
|
100% solids hybrid polyurea, 1:1 mix ratio. Provides UV stability. Designed for heated, high pressure plural component equipment.
|
A series of polyurea and polyurethane based coating systems designed for trowel application.
|
Product Name |
Description |
| DYNA-PUR™ 8010TR
|
100% solids pure polyurethane, 1:1:3 mix ratio if used with dry aggregate. Used for concrete and other structural repairs. It is compatible with most epoxies, polyurethane, and polyurea systems. Viscous enough for trowel application, but will also self-level in most applications. Ready to grind in less than 15 minutes.
|
| DYNA-PUR™ 8077TL
|
100% solids pure polyurea, 1:1 mix ratio. Used as a floor/wall membrane and patch. Provides UV stability. Contains anti-sag chemistry for vertical applications.
|
A family of products designed for use where phosphorescent properties are required. Weatherproof systems designed for exterior exposure are available.
|
Product Name |
Description |
| DYNA-GLO™ GLO-COAT
|
100% solids, two-component pure polyurea coating. A brush/roll liquid applied, UV rechargable photoluminescent “GLOW-IN-THE-DARK” system, consisting of a base coat, a texture coat, and a functional coat. Recommended for stairwells, safety marking, traffic marking, and special effects applications. For applications where ultra-high-life glow characteristics are desired.
|
A family of high-performance crack and joint fillers. HYDRALOK™ Crack/Joint Fillers have excellent adhesion to a variety of substrates such as brick, stone, concrete, wood, metal, and more. HYDROLOK™ products provide a high degree of water resistance, long-term sealing protection, very low vapor transmission rate, excellent flexibility and adhesion, and contains zero VOC's.
|
Product Name |
Description |
| HYDRALOK™ SLR-2
|
100% solids, aromatic, high-elongation crack/joint filler. 1:1 mix ratio. It has excellent adhesion to a variety of substrates. Self leveling. 2 minute working time. Recommended for cold temperature applications.
|
| HYDRALOK™ SLR-3
|
100% solids, aromatic, high-elongation crack/joint filler. 1:1 mix ratio. It has excellent adhesion to a variety of substrates. Self leveling. 3 minute working time.
|
| HYDRALOK™ FSL
|
100% solids, aromatic, high-elongation crack/joint filler. 1:1 mix ratio. It has excellent adhesion to a variety of substrates. It is aliphatic and will provide UV stability. Fast-setting. Recommended for vertical interior and exterior applications.
|
| HYDRALOK™ SLL
|
100% solids, aromatic, high-elongation crack/joint filler. 1:1 mix ratio. It has excellent adhesion to a variety of substrates. It is aliphatic and will provide UV stability. Self leveling. Recommended for interior and exterior applications.
|
DYNA-PRIME™ N-23 Water Chasing® Primerby Daniel
DYNA-PUR™ 7416BL Brushable Polyureaby Alex
Patch 'N Go™ (8010-TR)by David