Products https://dynasolv.com Dynasolv is the home of Dynaseal, and other polyurea coatings for the construction industry. Thu, 10 Feb 2022 18:03:55 +0000 en-US hourly 1 https://wordpress.org/?v=4.4.30 DYNA-PRIME™ N-23 Water Chasing® Primer https://dynasolv.com/product/dyna-prime-n-23/ https://dynasolv.com/product/dyna-prime-n-23/#comments Mon, 28 Dec 2015 21:58:22 +0000 https://dynasolv.com/?post_type=product&p=122
  • High Performance Primer that Penetrates and Waterproofs
  • Less than 36¢* per square foot! (2 Gal Kit)
  • Can be Used on Concrete and Other Surfaces
  • Can be Applied Above or Below Grade
  • 45 Minute Working Time*
  • Fast Return to Service
  • No VOCs; Environmentally Friendly
  • Two Component Formulation with 1-1 Mix Ratio
  • Color: Unpigmented
  • *Working time is dependent upon temperature and humidity
  • Discounts for polyurea products are available for professional contractors; call to inquire

    • The post DYNA-PRIME™ N-23 Water Chasing® Primer appeared first on Dynasolv.com.

    ]]>     DYNA-PRIME™ N-23 Water Chasing® Primer is a brushable/rollable grade of 100% solids polymeric primer that has been specially formulated as a high performance damp concrete primer.  DYNA-PRIME™ N-23 Water Chasing™ Primer penetrates deeply into wet porous substrates, providing a vapor barrier. DYNA-PRIME N-23 seals damp concrete to allow ease of topcoat application. DYNA-PRIME™ N-23 Water Chasing™ Primer has zero VOC’s and is a two-component primer.

    DYNA-PRIME™ N-23 Water Chasing® Primer has a 1 to 1 mix ratio of Iso to Resin. DYNA-PRIME™ N-23 is available in various sizes: 2 Quart Kits, 2 Gallon Kits; 10 Gallon Kits, and Drum Sets. (Call +1 (413) 284-0000 or Contact Us to Order Drum Sets).

    Recommended Uses:

    • Use wherever water saturation is present in a porous substrate.
    • Use for waterproofing applications to stop and prevent seepage of water through the substrate.
    • Use as a positive chemical bonding primer to reactive chemistries (epoxy, polyurethane, polyureas).
    Recommended Uses (Examples)
    Basins & Reservoirs Boat Floor Coating
    Bridge Coatings Concrete Decks
    Concrete Restoration Dock Coating
    Equipment Wash-Down Areas Foundation Coatings
    Garage Floor Coating Laboratory Floors
    Man Hole Restoration Marine Bridge and Deck
    Marine Wood Coating Parking Structure Coatings
    Pool Deck Coating Pool Coating
    Terrace Floors Tractor Trailer Floors
    Truck Freight Ramps Tunnels
    Water Runoff/Overflow Areas Water Treatment Plant Treatment Pond Coatings
    Water Treatment Sluices & Estuaries Water Park Features and Repairs
    Water Parks and Theme Parks

    DYNA-PRIME™ N-23 Water Chasing® Primer penetrates the surface of concrete, brick and other surfaces (forming a thick vapor barrier) to permanently seal out moisture.

    DYNA-PRIME N-23 Water Chasing Primer Penetrates and Seals

    Application Equipment Required:

    • 1/4" to 3/8" poly foam rollers (Available Here) or woven lint free rollers; roller frame
    • Bristle or foam brushes, as desired
    • Paint tray with disposable paint tray liners
    • Measuring and mixing containers
    • Stirring equipment and stirring sticks
    • Acetone for clean up

    Additional Information:

    An aliphatic top coat is recommended to enhance exterior performance.
    Be Sure to Read and Understand All Instructions Prior to Starting Application.

    The post DYNA-PRIME™ N-23 Water Chasing® Primer appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/dyna-prime-n-23/feed/ 4     DYNA-PUR™ 7416BL Brushable Polyurea https://dynasolv.com/product/dyna-pur-7416bl/ https://dynasolv.com/product/dyna-pur-7416bl/#comments Mon, 28 Dec 2015 21:59:08 +0000 https://dynasolv.com/?post_type=product&p=123
  • High Performance Coating Designed to Beautify and Preserve Concrete and Other Surfaces
  • Exhibits Excellent Durability and Chemical Resistance
  • Can be Applied Above or Below Grade
  • Can be Used as a Primer Coat
  • 20-40 Minute Working Time*
  • Fast Return to Service
  • High Solids Aliphatic Polyurea
  • No VOCs; Environmentally Friendly
  • Two Component Formulation with 1-1 Mix Ratio
  • Color: Gray, White, Black, Brown, Green, Red (Other colors available. Please inquire.)
  • *Working time is dependent upon temperature and humidity
  • Discounts for polyurea products are available for professional contractors; call to inquire
  • Additional products with different working times are available; call to inquire

    • The post DYNA-PUR™ 7416BL Brushable Polyurea appeared first on Dynasolv.com.

    ]]>     DYNA-PUR 7416BL is a brushable/rollable grade of pure polyurea that has been formulated to exhibit the physical properties of a high performance coating in a user-friendly product. This formulation exhibits excellent adhesion to concrete and other inorganic substrates. It contains a proprietary chemistry that bonds organic materials to inorganic materials.  With a fast return to service, DYNA-PUR 7416BL is a versatile coating product for many jobs. 

    DYNA-PUR 7416BL has a 1 to 1 mix ratio of Iso to Resin.  DYNA-PUR 7416BL is available in various sizes:  2 Quart Kits, 2 Gallon Kits; 10 Gallon Kits, and Drum Sets. (Call +1 (413) 284-0000 or Contact Us to Order Drum Sets).

    Recommended Uses (Examples)
    Basins & Reservoirs Boat Floor Coating
    Bridge Coatings Concrete Decks
    Concrete Restoration Dock Coating
    Foundation Coatings Garage Floor Coating
    Man Hole Restoration Marine Bridge and Deck
    Marine Wood Coating Metal DTM Coatings
    Metal Roof Coatings Parking Structure Coatings
    Pool Deck Coating Pool Coating
    Terrace Floors Tractor Trailer Floors
    Truck Freight Ramps Tunnels
    Water Runoff/Overflow Areas Water Treatment Plant Treatment Pond Coatings
    Water Treatment Sluices & Estuaries Water Park Features and Repairs
    Water Parks and Theme Parks

    Application Equipment Required:

    • 1/4" to 3/8" closed cell foam rollers (Available Here) or woven lint free rollers; roller frame
    • Bristle or foam brushes, as desired
    • Paint tray with disposable paint tray liners
    • Measuring and mixing containers
    • Stirring equipment and stirring sticks
    • Acetone for clean up

    Additional Information:

    Be Sure to Read and Understand All Instructions Prior to Starting Application.

    The post DYNA-PUR™ 7416BL Brushable Polyurea appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/dyna-pur-7416bl/feed/ 3     DYNA-PUR™ 9166BL Brushable Polyurea https://dynasolv.com/product/dyna-pur-9166bl/ https://dynasolv.com/product/dyna-pur-9166bl/#comments Tue, 29 Dec 2015 02:59:33 +0000 https://dynasolv.com/?post_type=product&p=124
  • High Performance Coating Designed to Beautify and Preserve Concrete and Other Surfaces
  • Exhibits Excellent Durability and Chemical Resistance
  • Can be Applied Above or Below Grade
  • 20-40 Minute Working Time*
  • Fast Return to Service
  • 100% Solids Aliphatic Polyurea
  • No VOCs; Environmentally Friendly
  • Two Component Formulation with 2-3 Mix Ratio
  • Color: Gray, White, Black, Brown, Green, Red (Other colors available. Please inquire.)
  • *Working time is dependent upon temperature and humidity
  • Discounts for polyurea products are available for professional contractors; call to inquire
  • Additional products with different working times are available; call to inquire

    • The post DYNA-PUR™ 9166BL Brushable Polyurea appeared first on Dynasolv.com.

    ]]>     DYNA-PUR 9166BL is a brushable/rollable grade of 100% solids pure polyurea that has been formulated to exhibit the physical properties of a high performance coating in a user-friendly product. This formulation exhibits excellent adhesion to concrete and other inorganic substrates. It contains a proprietary chemistry that bonds organic materials to inorganic materials.  DYNA-PUR 9166BL has a fast return to service time and is a versatile coating product.

    DYNA-PUR 9166BL has a 2 to 3 mix ratio of Iso to Resin.  DYNA-PUR 9166BL is available in various sizes:  2.5 Quart Kits, 2.5 Gallon Kits; 25 Gallon Kits, and Drum Sets.
    (Call +1 (413) 284-0000 or Contact Us to Order Drum Sets).

    Recommended Uses (Examples)
    Basins & Reservoirs Boat Floor Coating
    Bridge Coatings Concrete Decks
    Concrete Restoration Dock Coating
    Equipment Wash-Down Areas Foundation Coatings
    Garage Floor Coating Laboratory Floors
    Man Hole Restoration Marine Bridge and Deck
    Marine Wood Coating Metal DTM Coatings
    Metal Roof Coatings Parking Structure Coatings
    Pool Deck Coating Pool Coating
    Terrace Floors Tractor Trailer Floors
    Truck Freight Ramps Tunnels
    Water Runoff/Overflow Areas Water Treatment Plant Treatment Pond Coatings
    Water Treatment Sluices & Estuaries Water Park Features and Repairs
    Water Parks and Theme Parks

    Application Equipment Required:

    • 1/4" to 3/8" closed cell foam rollers or woven lint free rollers; roller frame
    • Bristle or foam brushes, as desired
    • Paint tray with disposable paint tray liners
    • Measuring and mixing containers
    • Stirring equipment and stirring sticks
    • Acetone for clean up

    Additional Information:

    Be Sure to Read and Understand All Instructions Prior to Starting Application.

    The post DYNA-PUR™ 9166BL Brushable Polyurea appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/dyna-pur-9166bl/feed/ 2     DYNA-SEAL™ Brushable Sealant https://dynasolv.com/product/dyna-seal-brushable-sealant/ https://dynasolv.com/product/dyna-seal-brushable-sealant/#comments Wed, 22 Apr 2015 10:44:59 +0000 https://dynasolv.com/?post_type=product&p=40
    • DYNA-SEAL is a multi-purpose elastomeric coating used from the roof to the foundation. It is a clear elastomeric roof coating or roof sealant that adheres to asphalt shingles and other roof materials. (Not for use on EPDM rubber). Use as a waterproof coating for many materials that require a waterproofing or a protective coating. It will stop a leak on contact, it can be applied on wet surfaces in below freezing temperatures.
    • Use on concrete, brick, block, and stone surfaces as: chimneys, foundations, sills, retaining walls, storage tanks, catch basins and other non-trafficked surfaces. DYNA-SEAL seals and rust proofs all metal surfaces and will clear coat copper. It also seals and waterproofs wood, asphalt surfaces, marble, ceramic tile, fiberglass, plastics, and glass.

    The post DYNA-SEAL™ Brushable Sealant appeared first on Dynasolv.com.

    ]]>     DYNA-SEAL Exterior Elastomeric Coating & Sealant Quick and Easy to Apply Dyna-seal Brushable Sealant Usage Chart Durable Roof Coating to Repair Roof Leaks

    • An easy to apply construction grade roof coating material! Even in cold winter weather!
    • Can be applied on a damp roof (no standing water).
    • Can be applied in temperatures as low as 0 degrees Fahrenheit.
    • Immediately stops water where applied.
    • The clear color matches every roof color*, and leaves a gloss finish where applied.
    • Adheres to asphalt shingles, wood shakes, and shingles, and tile roof materials. (Not to be used on EPDM rubber).
    • Recommended for joints and seams wherever dissimilar materials meet.

    DYNA-SEAL™ is a great multi-purpose elastomeric coating or sealant consisting of two products that work together.

    • DYNA-SEAL™ brush-able elastomeric roof coating for roof leak repairs.
    • DYNA-SEAL™ elastomeric exterior caulk for filling joints and cracks wider the 1/16 inch.
    • The two products exhibit excellent adhesion to each other. But they can be used separately.

    DYNA-SEAL adheres to most common construction materials. It can be used most anywhere that water damage can occur. No more ugly black tar or asphalt patches!

    DYNA-SEAL seals and waterproofs as well as moistureproofs**: Concrete, Brick, Block, and Stone surfaces such as: Chimneys, Foundations and Sills, Retaining Walls, Storage Tanks, Catch Basins, and other Non-Trafficked Surfaces!

    DYNA-SEAL seals and rustproofs all metal surfaces and clear coats copper. It seals, protects, and waterproofs Wood, Asphalt surfaces, Marble, Ceramic Tile, Fiberglass, Plastics, and Glass. * Not for use on EPDM rubber, and not recommended for white shingles.

    Download Dyna-Seal usage information sheet
    THEORETICAL YIELD (per Gallon)
    Surface Type Sealant Thickness Yield (approx.)
    Smooth (i.e. Sheet Metal) 1/16″ (62 mils) 100 sq. ft.
    Asphalt Shingles 1/16″ (62 mils) 80 to 150 sq, ft
    Porous (i.e. Wood Shingles) 1/16″ (62 mils) 25 sq. ft.
    TECHNICAL DATA
    Flash Point 108℉ (42.2℃)
    Tack Free Time 1 hour
    Elongation >600%
    Application Temperature 0℉ to 140℉ (-17.8℃ to 60℃)
    Service Temperature -40℉ to 180℉ (-40℃ to 82.2℃)
    Water Vapor Transmission 2.6 mg/sq. cm/24 hour
    Water Vapor Permeance (metric) 21 Perm

    The post DYNA-SEAL™ Brushable Sealant appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/dyna-seal-brushable-sealant/feed/ 7     DYNA-SEAL™ Waterproof Caulk https://dynasolv.com/product/dyna-seal-caulk/ https://dynasolv.com/product/dyna-seal-caulk/#comments Thu, 17 Dec 2015 21:16:55 +0000 https://dynasolv.com/?post_type=product&p=96
  • DYNA-SEAL™ is an elastomeric caulk with excellent adhesion. Works well with DYNA-SEAL™ Brushable elastomeric sealant.
  • It will stop a leak on contact, it can be applied on wet surfaces in below freezing temperatures.
  • Single-Component Solution, no mixing required
  • 10 oz Cartridge, Color: Clear

    • The post DYNA-SEAL™ Waterproof Caulk appeared first on Dynasolv.com.

    ]]>     DYNA-SEAL™ Elastomeric Caulk DYNA-SEAL™ elastomeric caulk is a high performance elastomeric caulk sealant which adheres to masonry, wood, asphalt, metal, and vinyl for use in a wide variety of roofing, window, door, siding, trim, architectural metal, and general construction applications. DYNA-SEAL™ elastomeric caulk may be applied to damp or oily surfaces even in low temperatures. The DYNA-SEAL™ family is made up of two products that work together: Brushable elastomeric sealant and elastomeric exterior caulk. handyman_seal

    Congratulations! . . . DYNA-SEAL™ ¹ has received the Handyman Club of America Member Tested Seal-of-Approval -Jessica B, Product Test Manager, Handy Magazine (¹ Formerly named Ultra-Cote).

    Uses and Advantages of DYNA-SEAL™ Elastomeric Caulk

       DYNA-SEAL™ elastomeric caulk
    • …adheres to masonry, wood, vinyl, metal, and asphalt.
    • …has excellent adhesion to all building surfaces even when damp or oily.
    • …has exceptional elongation and flexibility.
    • …expands 800% with full recovery.
    • …can be applied at any temperature.
    • …is easily applied, non-stringing formulation.
    • …will not crack.
    • …can be painted.
    • …is mildew-proof.
    • …has superior ultraviolet resistance.

    Surface Preparation for DYNA-SEAL™ Elastomeric Caulk

    Priming is not required on most surfaces, however, if adhesion to a particular substrate is in question, a test patch application is recommended. For best results all surfaces being caulked must be clean and structurally sound. All foreign materials such as dirt, dust, oils, grease, soot, loose paint, etc. should be removed. Do not use Xylol or MEK to clean joints or to remove surface coatings, unless the surface can be allowed to dry before application of the sealant. If the joint is wet with solvent, the sealant will not adhere properly. Contamination from curing agents and form release agents should be avoided.

    Applying DYNA-SEAL™ Elastomeric Caulk

    Joint Design: For optimum results, joints should be a minimum of 4 times greater than the anticipated movement. Minimum recommended joint size should be 1/4” x 1/4”. Maximum joint size should be 1/2” wide by 3/8” deep. Joint Backing: An open cell backer rod should be used to control joint depth. In shallow joints, a bond breaker tape should be installed to prevent three point contact. Application and Tooling: Apply with conventional equipment, filling the joint completely. When temperatures are below 40 degrees F, application will be easier if sealant is warmed. When temperature of the surface exceeds 140 degrees do not apply until the surface cools. A soap and water solution or a solvent such as Xylol may be used as a lubricant for tooling. Do not let tooling agents contaminate open joints. Painting: DYNA-SEAL™ elastomeric caulk may be painted after 24 hours at temperatures above 50℉. If using a relatively inflexible paint, allow sealant to dry for 3 days before painting. DYNA-SEAL™ elastomeric caulk may be coated with any latex and most oil based paints. Some paints may crack due to dynamic (moving) joints. See paint manufacturer’s specifications. Cleaning: Remove caulk material from tools before it cures by scraping and/or using solvents such as Acrylic Thinner, Xylol or MEK. Cured materials may be removed by cutting with sharp tools. Observe manufacturer’s precautions when using toxic or flammable solvents.

    The post DYNA-SEAL™ Waterproof Caulk appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/dyna-seal-caulk/feed/ 9     HYDRALOK™ SLR-3 https://dynasolv.com/product/slr-3-flexible-adhesive/ https://dynasolv.com/product/slr-3-flexible-adhesive/#comments Thu, 17 Dec 2015 22:28:43 +0000 https://dynasolv.com/?post_type=product&p=103
  • High Performance Crack Filler and Flexible Adhesive
  • Superior Adhesion to Many Surfaces (concrete, brick, stone, wood, metal, and more)
  • Exhibits High Flexibility; Permanently Fills and Waterproofs All Cracks
  • Outstanding Elongation with Repeated Expansion-Contraction Cycles
  • Can be Applied Above or Below Grade
  • Can be Applied In Cold Temperatures
  • Designed for Horizontal Applications; Self Leveling
  • 3 Minute Working Time*
  • 100% Solids Aromatic Polyurea
  • No Solvents; Little to No Shrinkage
  • No VOCs; Environmentally Friendly
  • Dual Component Cartridge: 300ml Side A (Iso), 300ml Side B (Resin)
  • Color: Gray (Other colors available. Please inquire.)
  • Included: 2 Static Mixers with each single 600ml Cartridge or 18 static mixers with a Case of 12
  • Top-Coating recommended if UV exposure will occur.
  • Required for Application: Standard 300ml x 300ml Dual Component Caulking Gun
  • *Working time is dependent upon temperature and humidity
  • *Application gun not included
  • Additional products with different working times are available; call to inquire
  • Discounts for polyurea products are available for professional contractors; call to inquire

    • The post HYDRALOK™ SLR-3 appeared first on Dynasolv.com.

    ]]>     HYDRALOK SLR-3 exhibits the superior performance and durability qualities necessary for a high-performance crack and joint filler. It has excellent adhesion to a variety of substrates such as concrete, brick, stone, wood, metal, and more.  HYDRALOK SLR-3 provides a high degree of water, chemical, and impact resistance, providing long-term sealing protection, very low vapor transmission rate, excellent flexibility and adhesion  HYDRALOK SLR-3 contains zero VOC’s and zero solvents.  HYDRALOK SLR-3 offers a fast topcoat/recoat time on jobs where topcoating or recoating is desired.

    HYDRALOK SLR-3 has a 1 to 1 mix ratio of Iso to Resin.  HYDRALOK SLR-3 is available in additional sizes:  750ml X 750ml Cartridges; 10 Gallon Kits, and Drum Sets.
    (Call +1 (413) 284-0000 or Contact Us to Order Drum Sets).

    Recommended Uses (Examples)
    Basins & Reservoirs Cold Storage Areas
    Concrete Decks Concrete Restoration
    Crack Filler Electronic Signage
    Equipment Wash-Down Areas Expansion Joints
    Fish Hatcheries Foundation Repair
    Garage Floor Restoration Laboratory Floor Restoration
    Man-Hole Sewer Linings Metal Roof Bolt Seam Repair
    Parking Lots Pipe Opening Sealer
    Pool Concrete Crack Repairs Pool Restoration
    Rubber Roof Joiner/Sealer Sidewalk Crack Repair

    Application Equipment Required:

    Standard 300ml x 300ml Dual Component Caulking Gun. (Available Here)

    Additional Information:

    An aliphatic top coat is recommended to enhance exterior performance.
    Be Sure to Read and Understand All Instructions Prior to Starting Application.

    The post HYDRALOK™ SLR-3 appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/slr-3-flexible-adhesive/feed/ 4     Patch ‘N Go™ (8010-TR) https://dynasolv.com/product/patch-n-go-8010-tr/ https://dynasolv.com/product/patch-n-go-8010-tr/#comments Mon, 28 Dec 2015 22:00:04 +0000 https://dynasolv.com/?post_type=product&p=125
  • High Performance Patching Compound Designed to Fill Holes, Spalls, and Depressions in Concrete
  • Exhibits Excellent Durability
  • Can be Applied Above or Below Grade
  • Fast Return to Service*
  • 100% Solids Polymer with Little to No Shrinkage
  • Environmentally Friendly; No Solvents
  • Two Component Formulation with 1-1 Mix Ratio
  • Color:  Lt. Gray
  • *Working time is dependent upon temperature and humidity
  • Discounts for polyurea products are available for professional contractors; call to inquire

    • The post Patch ‘N Go™ (8010-TR) appeared first on Dynasolv.com.

    ]]>     PATCH ‘N GO (DYNA-PUR 8010TR) is a trowel-able grade of 100% solids polyurethane that has been formulated as a high performance floor repair compound. After using PATCH ‘N GO to fill in the repair area, a concrete grinder can be used in 15 minutes, if desired. The Repair can be driven-on in 1 Hour. PATCH ‘N GO can be used for interior applications without top-coating or exterior applications with the application of a topcoat. PATCH ‘N GO is viscous enough for trowel application, but will also self-level in most applications.

    PATCH ‘N GO (DYNA-PUR 8010TR) has a 1 to 1 mix ratio of Iso to Resin. PATCH ‘N GO is available in various sizes: 2 Quart Kits, 2 Gallon Kits; 10 Gallon Kits, and Drum Sets (Call +1 (413) 284-0000 or Contact Us to Order Drum Sets).

    Recommended Uses (Examples)
    Cold Storage Areas Landscape Ponds
    Concrete Decks Man Hole Restoration
    Concrete Restoration Parking Structure Repairs
    Crack Filler Pool Concrete Repairs
    Equipment Wash-Down Areas Secondary Containment Areas
    Fish Hatcheries Select Fuel Storage and Containment
    Fish Ponds Tank Linings
    Foundation Coatings Tractor Trailer Floors
    Garage Floor Coating Truck Freight Ramps
    Laboratory Floors Tunnels

    Application Equipment Required:

    • Mason’s Trowel, plastic type (Depending upon application)
    • Measuring and mixing containers
    • Stirring equipment and stirring sticks
    • Acetone for clean up

    Additional Information:

    An aliphatic top coat is recommended to enhance exterior performance.
    Be Sure to Read and Understand All Instructions Prior to Starting Application.

    The post Patch ‘N Go™ (8010-TR) appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/patch-n-go-8010-tr/feed/ 4     Poly Foam Rollers https://dynasolv.com/product/poly-foam-rollers/ https://dynasolv.com/product/poly-foam-rollers/#respond Fri, 22 Jan 2016 22:49:53 +0000 https://dynasolv.com/?post_type=product&p=282
  • An Economical Applicator Choice
  • Cover is Made with Dense Foam
  • Low Thickness Foam Resists Tearing from Backing
  • Easy to Use with Professional Results
  • Environmentally Friendly
  • Fits Regular 9” or 3” Roller Handles and Trays

    • The post Poly Foam Rollers appeared first on Dynasolv.com.

    ]]>     The Poly Foam Rollers are designed for use with DYNA-PUR™ and DYNA-PRIME™ two component products, such as the DYNA-PUR™ 7416BL, 9066BL, and DYNA-PRIME™ N-23. Poly Foam Rollers are inexpensive and can be easily disposed of after use.

    The post Poly Foam Rollers appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/poly-foam-rollers/feed/ 0     SnowGrip – The Only Snow Retention Coating https://dynasolv.com/product/snowgrip/ https://dynasolv.com/product/snowgrip/#comments Wed, 28 Sep 2016 04:44:31 +0000 https://dynasolv.com/?post_type=product&p=744

    NOTE: SnowGrip uses DynaSolv.com for processing and fulfillment, this ensures a safe and quick ordering experience.

  • Prevent Injury and Damage caused by Sliding Snow and Ice.
  • Keep Building Entrances Safe, Clear and Reduce Snow Removal Costs.
  • Allow melt water to flow freely off the roof edge without refreezing.
  • Reduce Heating Cost with an Insulating Snow Layer.
  • Eliminate Ice Dams to stop leaks and dangerous conditions.
  • Add Service Life to your Roof by Reducing Thermal Movement.
  • Affordable and Simple Installation.

    • The post SnowGrip – The Only Snow Retention Coating appeared first on Dynasolv.com.

    ]]>
    SnowGrip solves dangerous snow related problems SnowGrip solves dangerous snow related problems SnowGrip solves dangerous snow related problems SnowGrip solves dangerous snow related problems

    SNOWGRIP solves these common problems of Dangerous sliding and falling ice, Expensive snow removal, and Damaging slides to building structures.

    How SnowGrip Works
     

    SNOWGRIP was featured in RCI Interface Technical Journal, download and read the article here.

     

    The post SnowGrip – The Only Snow Retention Coating appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/snowgrip/feed/ 5     VOYAGER™ Dual Component 300×300 Manual Dispenser https://dynasolv.com/product/voyager-dual-component-300x300-manual-dispenser/ https://dynasolv.com/product/voyager-dual-component-300x300-manual-dispenser/#respond Fri, 22 Jan 2016 22:44:39 +0000 https://dynasolv.com/?post_type=product&p=281
  • For Two Component Applications
  • Fits 300 ml X 300 ml Cartridges
  • Mechanical Advantage 26:1
  • Can Be Used with High Viscosity Materials
  • Secure and Accurate Cartridge Fit

    • The post VOYAGER™ Dual Component 300×300 Manual Dispenser appeared first on Dynasolv.com.

    ]]>     The VOYAGER™ Dual Component 300×300 Manual Dispenser is a durable piece of equipment that is designed for use with two component products, such as the HYDRALOK™ SLR-3 High Performance Crack Filler and Flexible Adhesive. The VOYAGER™ Dual Component 300×300 Manual Dispenser is manually operated, like a common caulking gun.

    The post VOYAGER™ Dual Component 300×300 Manual Dispenser appeared first on Dynasolv.com.

    ]]>     https://dynasolv.com/product/voyager-dual-component-300x300-manual-dispenser/feed/ 0